0
  • It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back
  • It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back

  • It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back

  • The gun-type UAV removal equipment is mainly used for compulsory control of the UAV or the flying model in the flight state, launching suppression control signals to the UAV, interfering with the data link and positioning system, blocking the communication and navigation signals between the UAV and the remote control, forcing the UAV to hover in place, automatically land or return.
  • $ 12500
  • 0 in Stock NowJR-MD1121

  • GROUP

    JR1121

  • QUANTITY

  • Contact Online

Advantages：Portable design, single-operator control, interference range over 1500 meters (depending on environment)

Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones

Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance

Convenient for rapid deployment, one person can operate, the equipment is equipped with large capacity battery, sustainable work for more than 50 minutes. Single channel power, action distance of more than 2000 meters (according to the use of the environment). It can effectively control all low-altitude multi-rotor UAVs on the market. Once the equipment is turned on, the remote control of the UAVs can fail, the images and videos captured can not be transmitted back, the GNSS navigation system loses signal, and the contact between the UAVs and the remote control is completely cut off.

The device emits high-power interference signals in the same frequency band to suppress the UAV control signal, and the interference distance can reach 2000m.

Using high-gain directional antenna, single-channel transmission power up to 30 watts, energy concentration, more accurate target.

Use large capacity battery, can work for more than 50 minutes, can be selected according to work requirements.

The device is portable, highly maneuverable and is not constrained by any terrain environment, and can be flexibly deployed to all areas that need to be protected against drone intrusion.

It can interfere with most of the commonly used signal frequency bands of drones, covering more than 95% of mainstream UAV models on the market.

Grab the drone signal quickly, work as usual under fog and light rain weather conditions, and have strong environmental adaptability.

You May Be Intersted
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$24980
Multi-target Real-time Positioning Strong Compatibility Simulation and Reconstruction of Building Structures Remote Wide Area Scan

It can remotely penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain two-dimensional coordinates and quantities of targets, indoor structures, etc.

The long-distance wall penetration detection system 42 is a long-distance 2D positioning penetrating reconnaissance equipment, which can remotely penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain the two-dimensional coordinates and quantity of targets, indoor structure, etc.

$1670
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors, and remote detonation of explosives.

$240000
The equipment is small in size, light in weight and easy to carry, so it can be used as a single soldier or combined with the network to perform coordinated security tasks

The jammer integrates the functions of detection,tracking,forensics,display and control,countermeasures,and networking Unmanned aerial vehicle

JR-TSL1182 UAV inspection and combat integrated handheld control equipment is a set of inspection and combat integrated handheld jammer, which integrates detection, tracking, forensics, display and control, countermeasures, and networking functions

$55490
It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back

The device is composed of a detection system, a jamming system, and an operation terminal tablet, and is a highly integrated and portable anti-drone system

The gun-type UAV removal equipment is mainly used for compulsory control of the UAV or the flying model in the flight state, launching suppression control signals to the UAV, interfering with the data link and positioning system, blocking the communication and navigation signals between the UAV and the remote control, forcing the UAV to hover in place, automatically land or return.

$12500
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.

The device has a shield-like design for rapid deployment

The portable drone countermeasure device is a shield-type design, which is easier to carry, convenient for rapid deployment, can be operated by a single person, and the device has a built-in large-capacity battery, which can last for 45 minutes. The single channel has high power and has a range of more than 2.5 km. It can effectively control the low-altitude multi-rotor UAV on the market, once the equipment starts to strike, the remote control of the UAV can fail, the captured images and videos cannot be transmitted, the GNSS navigation system loses signal, and the connection between the UAV and the remote control is completely cut off, so as to effectively prevent the UAV from entering the defense area and ensure the safety of low-altitude airspace.

Inquiry
Shop by Categories