0
  • It is composed of radar array + tripod + portable backpack, with modular design, simple structure, easy installation, no wiring, and simple and fast erection
  • It is composed of radar array + tripod + portable backpack, with modular design, simple structure, easy installation, no wiring, and simple and fast erection

  • It is composed of radar array + tripod + portable backpack, with modular design, simple structure, easy installation, no wiring, and simple and fast erection

  • Mainly consists of radar array + tripod + portable backpack, using modular design, simple structure, easy to install, no wiring, easy and quick to set up.Radar through the wireless transmission module output target location and characteristics of information to the supporting display control system, terminal software is simple to operate, easy to learn and easy to use is mainly applicable to the border, airports, military bases and other key areas of the detection of pedestrians and vehicles, vigilance and target indication.
  • $ 58280
  • 0 in Stock NowJR-MD1170

  • Group

    1170

  • QUANTITY

  • Contact Online

Product introduction: It is mainly composed of radar array + tripod + portable backpack, adopts modular design, simple structure, easy installation, no wiring, simple and fast erection, and the radar outputs target position and characteristic information to the supporting display and control system through wireless transmission module. The terminal software is simple to operate, easy to learn and easy to use.

Detection distance: 100m~1.5km (pedestrian) 100m~3.0km (vehicle) - can also be used for drone detection

Operating frequency band: C-band

Applications: It is used for the detection, vigilance and target indication of pedestrians and vehicles in key areas such as borders, airports, and military bases.

Positioning and orientation, real-time display of position, orientation and other information DBF technology multi-beam technology can improve anti-interference ability.

Lightweight miniaturization and anti-interference effectively enhance its mobility and convenience.

It is convenient and fast, strong mobility for individual soldiers, can be completed in five minutes, long battery life, and can be replaced.

Wireless transmission module, remote control, easy to operate, not limited by the site.

You May Be Intersted
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
Advanced technology system Target range High monitoring accuracy Monitoring distance Strong environmental adaptability Wide range of application

Five-sided array all-round 360-degree detection, the maximum detection distance ≥ 3.0km.

• The phased array system of the radar offers high flexibility and multi-target tracking capabilities. • By controlling the phase of each radiating element, multiple beams can be generated and scanned, enabling the tracking and identification of multiple targets. • Compact and portable, easy to set up, lightweight, and simple to operate. • Maximum detection range is ≥ 3.0km (typical target: DJI "Phantom 3"), depending on the model/environment. • Simple installation and strong usability, with user-friendly terminal software that is easy to learn and use. • High reliability, as the search radar does not require mechanical rotating equipment, avoiding radar work interruptions due to electromechanical failures, thus ensuring higher reliability. • Advanced technology system capable of non-uniform detection, employing different detection schemes for different areas to improve overall detection performance.

$416200
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$24980
The portable full-range detection device is a high-performance drone detection tool. Its lightweight and portable design can cover a wide frequency band from 70MHz to 6000MHz

70MHz to 6000MHz full-band detection/built-in large-capacity battery

portable full-frequency detection device is a high-performance drone detection tool. Its lightweight and portable design can cover a wide frequency band from 70MHz to 6000MHz. It supports drones of multiple brands and models including the full range of DJI and Changtianyou, as well as other drones using the same or compatible protocols, covering more than 95% of common civilian drone models

$18050
The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution

The digital receiving and transmitting arrays are used to transmit a wide beam and receive DBF to achieve simultaneous multi-beam

Holographic gaze detection radar, also known as full-time and space-time radar and pan-detection radar, adopts digital receiving and transmitting arrays, transmitting a wide beam, receiving DBF to achieve simultaneous multi-beam, and realizing continuous detection of the entire airspace. The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution. It is mainly used for the detection, alert and target indication of UAVs, birds, and aircraft in key areas such as airports, borders, and coastlines. It can quickly adapt and process the environment and target type, and continuously "flood illuminate" the entire field of view to form a three-dimensional space of the target

Inquiry
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors, and remote detonation of explosives.

$240000
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route

Full spectrum jamming, covering 20MHz-6GHz, with customizable frequency bands

The omnidirectional jamming device uses an omnidirectional antenna array to block and interfere with the reception and processing of drone signals, such as video transmission, remote control, and navigation, within a 360° range. This achieves countermeasures like forced return, forced landing, and repelling, allowing for rapid and effective handling of suspicious drones.

Inquiry
Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design

The interference frequency and interference bandwidth can be customized according to the mainstream UAV frequency band, and multiple interference channels can be output independently or combined

The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.

$3840
Shop by Categories