0
  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area
  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

  • The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.
  • $ Inquiry
  • 0 in Stock NowJR-MD1175

  • Group

    JR1175

  • QUANTITY

  • Contact Online

Product introduction: The tracer turntable is composed of a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. According to the target location information provided by the search system, the photoelectric tracking system can confirm the suspicious target by automatic identification or manual designation during the search process, and then switch to the target automatic tracking working mode.

Infrared thermal imaging: 30m ≥ object distance

Visible light camera: 120m between ≥ and objects

Applicable scenarios: public security, power system, anti-terrorism, public security, border and coastal defense, military facility perimeter, airports and ports and other key security places in large scenarios.

You May Be Intersted
The system realizes low-altitude three-dimensional protection within the diameter of the defense area greater than 10,000 meters JR-HJR1183 UAV frame-side system

It can effectively detect all drones within 10 kilometers, and accurately locate the location and model of the drone. JR-HJR1183 UAV frame-side system

The portable drone detection system can effectively detect all drones within 10 kilometers, and accurately locate the location and model of the drone.

$23600
Active phased array radar using MIMO systems and DBF technology can accurately give trajectory information such as azimuth, distance, and velocity of the target

can accurately give the target's azimuth, distance, speed and other track information.

Radar is an active phased array radar that adopts MIMO system and DBF technology. It is mainly used for the detection, warning and target indication of pedestrians and vehicles in the border, perimeter, checkpoint, military base and other key areas, and can accurately give the target's azimuth, distance, speed and other track information.

$58280
The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, early warning and target indication of UAVs in the monitoring area

and 360 degree all-round coverage.

The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, warning and target indication of UAVs in the monitoring area, providing real-time, accurate and continuous air situation and target information for the monitoring system and providing security.

Inquiry
It is composed of radar array + tripod + portable backpack, with modular design, simple structure, easy installation, no wiring, and simple and fast erection

Portable rechargeable and movable monitoring equipment, light and convenient,

Mainly consists of radar array + tripod + portable backpack, using modular design, simple structure, easy to install, no wiring, easy and quick to set up.Radar through the wireless transmission module output target location and characteristics of information to the supporting display control system, terminal software is simple to operate, easy to learn and easy to use is mainly applicable to the border, airports, military bases and other key areas of the detection of pedestrians and vehicles, vigilance and target indication.

$58280
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors, and remote detonation of explosives.

$240000
The system adopts the integrated design of detection and attack, scientifically combines the UAV detection and countermeasure system, and is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

No need for personnel to attend intelligent interference mode, can increase the energy storage battery.

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$263580
In order to realize the interception control of UAVs that need to use the navigation system for flight control, so that they cannot fly into the protected area, and ensure the low-altitude safety of the area

Prevent drones from flying in sensitive areas and set up "no-fly zones" for drones

Based on the deception of the drone's internal positioning device and the database of restricted and no-fly zones, the drone can react according to its own built-in program strategy. The UAV navigation decoy system transmits simulated satellite navigation signals to navigate and decoy the UAV that intrudes into sensitive areas, so as to realize the defense and control of the UAV. The system mainly injects navigation deception signals into the UAV to realize the control and takeover of the UAV, so that the UAV can be quickly located to a safe area, so that the UAV can fly quickly, get out of the control of the operator, and decoy or set up a no-fly zone to prevent the UAV from flying in sensitive areas and set up a "no-fly zone" for the UAV.

Inquiry
Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return

Active thermal design, wideband power amplifier design, digital interference source design, software customization

The full-frequency omnidirectional jamming equipment interferes with the satellite navigation signal of the UAV by transmitting electromagnetic waves or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return. The full-band omnidirectional jamming equipment consists of multi-channel digital signal sources, high-power broadband power amplifiers, broadband omnidirectional antennas, power modules, etc. The equipment supports a variety of modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.

$3890
Shop by Categories