0
  • The photoelectric tracking directional jamming all-in-one machine is mainly composed of interference unit and photoelectric tracking unit
  • The photoelectric tracking directional jamming all-in-one machine is mainly composed of interference unit and photoelectric tracking unit

  • The photoelectric tracking directional jamming all-in-one machine is mainly composed of interference unit and photoelectric tracking unit

  • The JR-TSL1185 series UAV photoelectric tracking and directional jamming all-in-one machine is mainly composed of a jammer unit, an electroelectric tracking unit and a servo turntable, which has long-distance, all-day, and 360° all-round UAV target tracking
  • $ Inquiry
  • 0 in Stock NowJR-TSL1185

  • JR1185

    Default

  • QUANTITY

  • Contact Online

The JR-TSL1185  series UAV photoelectric tracking and directional jamming all-in-one machine is mainly composed of a jammer unit, an electroelectric tracking unit and a servo turntable, which has long-distance, all-day, and 360° all-round UAV target tracking and countermeasure capabilities. By emitting electromagnetic waves in specific frequency bands to interfere with UAV satellite navigation signals or block the communication link between UAV and remote controller, the UAV can produce the effect of forced landing or return.

Frequency band

400MHz, 800MHz, 900MHz, 1.5GHz, 2.4GHz, 5.8GHz multi-band

Interference distance

1km~3km optional (0.1W radiation source)

Track performance

Resolution: 1920*1080P (visible light)/640*480 (thermal imaging) optional

Tracking capacity: 1km~2km optional

Dry-pass ratio

20:1

Interference angle

360° (gimbal realization)

Interference effective time

≤3s

Connection

Ethernet interface

Power supply mode

AC110~220V

You May Be Intersted
Easy to Install Green Safety Partition Control Integrated Design

The detection unit of the decoy active defense system detects and identifies the upper and lower remote control signals and data image transmission signals of the UAV to realize the intrusion warning of the UAV

The active defense system integrates the functions of radio detection and decoy interference, and a single system has both detection and decoy countermeasures. The detection unit of the decoy active defense system detects and recognizes the up and down remote control signals and data image transmission signals of the drone, and realizes the intrusion warning of the drone. At the same time, the system cooperates with the deception and jamming unit to launch simulated satellite navigation signals to deceive the drone in navigation, so that the drone intruding into the defense area is "lost", which makes the drone unable to fly according to the predetermined path, and realizes the no-flying of the drone area control.

Inquiry
Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return

Active thermal design, wideband power amplifier design, digital interference source design, software customization

The full-frequency omnidirectional jamming equipment interferes with the satellite navigation signal of the UAV by transmitting electromagnetic waves or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return. The full-band omnidirectional jamming equipment consists of multi-channel digital signal sources, high-power broadband power amplifiers, broadband omnidirectional antennas, power modules, etc. The equipment supports a variety of modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.

$3890
The system is easy to operate, has a wide range of defense, and can be networked and controlled, and can be operated continuously. multispectral imaging ranging photoelectric

Round-the-clock, full-screen, all-time automatic fast locking and precise tracking with a multispectral camera system

Multispectral imaging ranging photoelectric, tracking, prevention and control integrated system, integrated uncooled long-distance passive infrared thermal imaging detector, telephoto visible light fog-transparent high-definition network camera, intelligent identification module, servo heavy-duty PTZ, Beidou positioning in one, to achieve multi-spectrum, multi-channel day and night complementary imaging, in low illumination, bad weather, night 24 hours day and night monitoring. Through the integrated prevention and control platform, it can remotely carry out automatic or manual rapid and effective disposal of suspicious targets, which is easy to operate, has a wide range of defense, and can be networked for control and continuous operation.

Inquiry
The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

The detection end passively intercepts the signal between the drone and the remote control to realize the detection of the drone

The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.

$52050
The device is based on spectrum sensing and radio suppression technology, with UAV detection and countermeasure capabilities, capable of detecting, identifying and coordinating the fight against "rogue" UAVs

Integrated industrial design, simple and covert appearance, suitable for vehicle-mounted installation and use. Long detection and countermeasure range, up to 1-3 kilometers in urban environments.

Drone detection and countermeasure integrated vehicle-mounted device. The device is based on spectrum sensing and radio suppression technologies, possessing both drone detection and countermeasure capabilities, capable of detecting, identifying, and coordinated countermeasures against "rogue" drones. Integrated industrial design with a simple and covert appearance. Flexible deployment, long detection and countermeasure distances, reaching 1-3 kilometers in urban environments.

Inquiry
The detection and early warning of UAVs for long-line-of-sight solves the shortcomings of the current single-soldier anti-UAV operations that are difficult to find targets in time by visual sight

The early warning instrument is used for the detection and early warning of long-range UAVs, and the equipment receives UAV signals

independently developed low-power digital-analogue hybrid receiver technology and advanced power management technology, using external ultra-wideband antenna, detection radius up to 3 km. It can detect and identify more than 90% of common civil UAV models (including quadcopter, fixed-wing, DIY, traverser, etc.), and accurately realise sound, light and vibration alarms, and at the same time, realise a very low false alarm rate of less than 1 time/day in the complex electromagnetic environment.

Inquiry
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
The purpose of the construction of the OWL UAV defense system is to achieve efficient and precise strikes against UAVs and ensure the safety protection of specific areas or key facilities

24/7 wide area monitoring

According to the prison's demand for resistance to low altitude drone invasion/suspected ground moving target invasion and destruction/behavior management of prisoners inside the prison area, a prison three-dimensional defense system is built through an integrated structural design using radar+passive detection+omnidirectional interference equipment+drone deception equipment architecture.

Inquiry
Shop by Categories