0
  • Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.
  • Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

  • Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

  • The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors, and remote detonation of explosives.
  • $ 240000
  • 0 in Stock NowJR-MD72

  • GROUP

    72 50kg

  • QUANTITY

  • Contact Online

• Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction.

• Four Imaging Sources Front view, gimbal, upper, and lower mechanical claws provide 360° surveillance of the surroundings.

• Mechanical Arm Can Lift Objects up to 50KG

• Dual Swing Arm and Track Structure Allows for easy traversal over complex terrains.

• Equipped with Wireless and Wired Control Modes Enhances device compatibility in interference-prone environments.

• Portable and Fast-Moving Robot Facilitates quick deployment for combat and operational tasks.

• Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

The robot is equipped with a 6-degree-of-freedom bomb disposal robot arm to achieve grabbing in any direction;

Front view, pan/tilt, mechanical claws, and mechanical claws can be used to detect the surrounding environment 360°;

The robot arm can grab 50KG weights;

The front and rear double swing arms + crawler structure can easily cross various complex terrains;

Equipped with wireless and wired control modes to improve the compatibility of the equipment under interference;

The robot is light to carry, fast in travel speed, and can be quickly deployed for combat and work;

The robot arm has the ability to be quickly replaced, equipped with standard mechanical claws (balanced), knives, scissors, rakes, hooks, drills and other accessories, which can be quickly replaced to complete various combat tasks.

You May Be Intersted
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
The equipment is small in size, light in weight and easy to carry, so it can be used as a single soldier or combined with the network to perform coordinated security tasks

The jammer integrates the functions of detection,tracking,forensics,display and control,countermeasures,and networking Unmanned aerial vehicle

JR-TSL1182 UAV inspection and combat integrated handheld control equipment is a set of inspection and combat integrated handheld jammer, which integrates detection, tracking, forensics, display and control, countermeasures, and networking functions

$55490
Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System

Low-altitude surveillance radar is a 3D space surveillance radar for low-altitude, small targets, all-round, high-altitude coverage areas

Low-altitude surveillance radar is 3D space surveillance radar that aims at low-altitude small target, all-around, high elevation coverage area. It is mainly designed for real-time detection and tracking of air vehicle, ground human and vehicle target. Then target information will be transmitted and reported to management and control center. It can be installed by long-term fixed, vehicle mounted and temporary deployment, flexibly apply to different application scenarios.

Inquiry
Good Scalability All-day, All-round Low False Alarm Rate High Product Design Maturity

The device realizes the detection and early warning of the UAV (remote control) by detecting, identifying and locating the upper and lower remote control signals and data image transmission signals of the UAV

The RF Scanner is mainly composed of an array antenna, a radio frequency circuit, a multi-channel synchronous receiver, and a GNSS positioning module, etc., to realize the detection and discovery of drone in a specific frequency range. The equipment realizes the detection and early warning of the drone (remote control) by detecting, identifying and positioning the up and down remote control signals and data image transmission signals of thedrone aircraft. The device is a passive detection device, does not actively emit electromagnetic signals, green and safe.

$3400
This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

Detect, warn, and indicate target areas, and accurately provide target trajectory information

This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

$55510
Easy to Install Multi-sector Antenna Design High Power Broadband Power Amplifier Multi-band Interference

The omnidirectional jammer consists of a multi-channel digital signal source, a high-power broadband power amplifier, a broadband omnidirectional antenna, and a power module

The omnidirectional jammer interferes with the satellite navigation signal of the drone by transmitting electromagnetic waves or blocks the communication link between the drone and the remote control, so that the drone has the effect of forced landing or return. The omnidirectional jammer is composed of multi-channel digital signal source, high-power broadband power amplifier, broadband omnidirectional antenna, power supply module, etc. The jammer supports a variety of modulated signal outputs, and the broadband omnidirectional antenna realizes omnidirectional radiation of high-power interference signals.

Inquiry
Integrated detection and countermeasures, small, light, full-band detection, full-band positioning

UAV automatic detection, identification and interference detection and combat integrated equipment, 360° all-round passive passive detection

JR1136 UAV defense system has the integration of detection and attack, detection and countermeasures, smaller, lighter, full-band detection, full-band positioning, in the 50MHz-6GHz range of UAV signals can be identified and positioned. The UADS-ZG42 UAV defense system is composed of intelligent spectrum detection and radio interference integrated host and operating terminal, which is easy to install, simple to use, and flexible to configure in various scenarios.

Inquiry
High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

It can penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain information such as two-dimensional coordinates, the number of targets, and indoor structures.

Two Dimensional Through Wall Radar CE200 is a two-dimensional positioning penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind them, and quickly obtain information such as 2D coordinates, quantity of targets and indoor structure.

$2090
Shop by Categories