0
  • 4 low-band antenna interfaces are reserved, and multiple sets of programmable TTL bidirectional interfaces (GPIOs) are provided, which can be used as operation buttons and various control outputs
  • 4 low-band antenna interfaces are reserved, and multiple sets of programmable TTL bidirectional interfaces (GPIOs) are provided, which can be used as operation buttons and various control outputs

  • 4 low-band antenna interfaces are reserved, and multiple sets of programmable TTL bidirectional interfaces (GPIOs) are provided, which can be used as operation buttons and various control outputs

  • Both omnidirectional detection antenna and directional direction finding antenna have independent input ports, which can automatically switch between omnidirectional and directional antennas under different states. Four low-band antenna ports are reserved to provide one high-current drive output, which can drive alarm devices such as sound and optical vibration when needed.
  • $ Inquiry
  • 0 in Stock NowJR-MD1112

  • GROUP

    SKU

  • QUANTITY

  • Contact Online

Advantages：2dBi dual-frequency omnidirectional antenna, detection radius up to 2km, wide voltage low power consumption.

Description：Product functions: gaze direction finding for the detected target, scan the signal level of the UAV in 360° azimuth through manual operation, the unit quickly outputs the signal level of the frozen target, and finds the maximum direction as the direction

Application Fields：It is used for secondary development to build a general UAV detection system or equipment.

High sensitivityWith a 2dBi dual-frequency omnidirectional antenna (60mm long, 15mm wide and 2mm thick, available), an omnidirectional detection radius of more than 2km can be achieved.

Product advantageAll RF input ports are equipped with low loss limiter and can input continuous waves of up to 1W power without damage.

Wide current low power consumptionIn the input voltage range of 9~36V, the power consumption of the whole machine is less than 5w, and the 24V/5Ah battery can continue to work for more than 24 hours.

Secondary developmentAccording to the product design requirements, the detection unit is integrated, and the detection frequency band can cover 95% of the market UAV, and the performance advantage is more prominent.

You May Be Intersted
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route. Compared to omnidirectional jamming, the strike is accurate

Compared to omnidirectional interference, the targeting is more precise, the impact on the surrounding environment is minimal, and the reliability is higher.

The device is mainly used for signal interference of UAV, and can be combined with the detection equipment of UAV to form an intelligent linkage defense system.

$97110
It has the function of combining detection and attack, detection and confrontation, smaller size, lighter weight, full-band detection, and full-band positioning

The device has drone detection, recognition and jamming functions.

JR1115 UAV detection equipment can realize multi-target intrusion alarm, target identification and location, display target motion trajectory and display the position of the flight controller. The system realizes low altitude three-dimensional protection within the radius of the defense area greater than 5000 meters, and has been widely used in government agencies, prison guards, aviation airports, military restricted areas, major activities and other fields.

Inquiry
It can realize automatic detection and identification, positioning and tracking, and interference disposal of intrusion drones

Multi-functional portable watch and play integrated system, full frequency detection + interference + flying hand positioning.

This system is based on the research and development of central control + message level protocol analysis technology, equipped with a UAV integrated control platform, which can carry out real-time monitoring and early warning of the UAV within the detection range, and accurately display the fuselage serial number, model, position, speed, altitude, track, remote control location and other information of the target UAV, so as to carry out countermeasures against the UAV and prevent the intrusion of the UAV.

Inquiry
Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning Intelligent Recognition

which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

Three Dimensional Imaging Through Wall Radar 43 is a 3D imaging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

$55700
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, early warning and target indication of UAVs in the monitoring area

and 360 degree all-round coverage.

The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, warning and target indication of UAVs in the monitoring area, providing real-time, accurate and continuous air situation and target information for the monitoring system and providing security.

Inquiry
Hacking into the "Black Fly" UAV navigation system, so as to achieve interception control of UAVs that require flight control using the navigation system, so that they cannot fly into protected areas

Deceptive interference is carried out on the satellite navigation coordinate information received by the UAV using satellite navigation and positioning, and the no-fly zone projection or area denial function is realized.

By radiating low-power regenerative navigation satellite signals (power no more than 10dBm), the "black fly" UAV navigation system is invaded, so as to achieve the interception and control of the UAV that needs to use the navigation system for flight control, so that it cannot fly into the protected area and ensure the low-altitude safety of the area. The equipment is designed with portable pull-rod box, which can be flexibly deployed in key areas of the field.

Inquiry
High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

It can penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain information such as two-dimensional coordinates, the number of targets, and indoor structures.

Two Dimensional Through Wall Radar CE200 is a two-dimensional positioning penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind them, and quickly obtain information such as 2D coordinates, quantity of targets and indoor structure.

$2090
Shop by Categories