0
  • For UAV detection, identification and direction finding JR-HJR1191 Unmanned aerial vehicle control system
  • For UAV detection, identification and direction finding JR-HJR1191 Unmanned aerial vehicle control system
  • For UAV detection, identification and direction finding JR-HJR1191 Unmanned aerial vehicle control system
  • For UAV detection, identification and direction finding JR-HJR1191 Unmanned aerial vehicle control system

  • For UAV detection, identification and direction finding JR-HJR1191 Unmanned aerial vehicle control system

  • For UAV detection, identification and direction finding. Based on spectrum perception and artificial intelligence technology, the remote control and video transmission of UAVs were identified and classified. Equipment features include: UAV direction finding; types of drones; Long detection distance, low false alarm rate, screen display; Small size, light weight, handheld or working with interference counting guns, suitable for patrol monitoring of office buildings, industrial parks, borders and coastal defense sites. Effectively prevent the interference of UAVs in various control areas, so as to reduce the distress caused by UAV intrusion.
  • $ Inquiry
  • 0 in Stock NowJR-HJR1191

  • Group

    JR1191

    Long-distance detector

  • QUANTITY

  • Contact Online

1. Passive detection: does not actively transmit electromagnetic signals, does not interfere with the normal use of surrounding communication equipment, and is environmentally friendly;

2. Small and portable: various functions, working alone or assembled on the jamming gun to work together;

3. Frequency expandable: Antennas of different frequencies can be configured according to needs, and the antenna interface adopts general standards, which is easy to disassemble and replace;

4. Fast charging: Charging adopts the form of C-type interface, which is convenient and fast to use, and is compatible with the charging interface of mainstream mobile phones on the market;

5. Strong environmental adaptability: high level of protection, strong anti-falling ability, support normal detection and identification in bad weather environments;

6. Real-time screen display: Use the screen to display the status of the target drone in real time.

You May Be Intersted
The portable full-range detection device is a high-performance drone detection tool. Its lightweight and portable design can cover a wide frequency band from 70MHz to 6000MHz

70MHz to 6000MHz full-band detection/built-in large-capacity battery

portable full-frequency detection device is a high-performance drone detection tool. Its lightweight and portable design can cover a wide frequency band from 70MHz to 6000MHz. It supports drones of multiple brands and models including the full range of DJI and Changtianyou, as well as other drones using the same or compatible protocols, covering more than 95% of common civilian drone models

$18050
It is used to monitor the detection, early warning and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

Able to accurately monitor target position and trajectory information

This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

$44410
The device is based on spectrum sensing and radio suppression technology, with UAV detection and countermeasure capabilities, capable of detecting, identifying and coordinating the fight against "rogue" UAVs

Integrated industrial design, simple and covert appearance, suitable for vehicle-mounted installation and use. Long detection and countermeasure range, up to 1-3 kilometers in urban environments.

Drone detection and countermeasure integrated vehicle-mounted device. The device is based on spectrum sensing and radio suppression technologies, possessing both drone detection and countermeasure capabilities, capable of detecting, identifying, and coordinated countermeasures against "rogue" drones. Integrated industrial design with a simple and covert appearance. Flexible deployment, long detection and countermeasure distances, reaching 1-3 kilometers in urban environments.

Inquiry
The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

It is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board

The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.

Inquiry
Easy to Install Green Safety Partition Control Integrated Design

The detection unit of the decoy active defense system detects and identifies the upper and lower remote control signals and data image transmission signals of the UAV to realize the intrusion warning of the UAV

The active defense system integrates the functions of radio detection and decoy interference, and a single system has both detection and decoy countermeasures. The detection unit of the decoy active defense system detects and recognizes the up and down remote control signals and data image transmission signals of the drone, and realizes the intrusion warning of the drone. At the same time, the system cooperates with the deception and jamming unit to launch simulated satellite navigation signals to deceive the drone in navigation, so that the drone intruding into the defense area is "lost", which makes the drone unable to fly according to the predetermined path, and realizes the no-flying of the drone area control.

Inquiry
The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system

The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

The equipment is mainly used for UAV detection and identification, and can be freely matched with UAV countermeasure equipment or deception equipment to form a defense system.

$7780
High power in a single channel, operating range of more than 1.5 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed, and the connection between the UAV and the remote controller is cut off from a distance, forcing the UAV to land, hover or return home.

The three-channel drone strike gun has a portable design for rapid deployment and can be operated by one person.It can effectively control the low-altitude multi-rotor UAV on the market, isolate the contact between the UAV and the remote control, force the UAV to hover, land or return, and ensure the safety of the low-altitude airspace. The three-channel UAV strike gun suppresses the UAV control signal by transmitting high-power interference signals in the same frequency band (1.5GHz, 2.4GHz, 5.8GHz).

$13050
It has the ability to suppress the receiving channels of UAV navigation signals, remote control signals, and image transmission signals

The three channels are independently powered, and each channel can be flexibly controlled to set interference separately.

JR1126 jammer is a device that interferes with UAV signals. It has the ability to suppress the navigation signal, remote control signal and the receiving channel of the image transmission signal of the UAV, so that the UAV can not locate and lose control, and thus achieve the purpose of preventing the intrusion of the UAV. Suitable for assembly with other equipment systems, can also be used separately for interference installation.

Inquiry
Shop by Categories