0
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return

  • The full-frequency omnidirectional jamming equipment interferes with the satellite navigation signal of the UAV by transmitting electromagnetic waves or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return. The full-band omnidirectional jamming equipment consists of multi-channel digital signal sources, high-power broadband power amplifiers, broadband omnidirectional antennas, power modules, etc. The equipment supports a variety of modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.
  • $ 3890
  • 0 in Stock NowJR-HN1171
  • Group

    1171

  • QUANTITY

  • Contact Online

Frequency band

300MHz-6000Mhz frequency band

Interference distance

≥3km (0.1W radiation source)

Transmit power

100W per band≤

Dry-pass ratio

Not less than 10:1

Interference angle

360° omnidirectional

Interference effective time

≤3s

Power supply mode

AC110~220V

Ingress protectionIP65

You May Be Intersted
Device host + terminal operating system. It is mainly used for long-distance UAV detection, which solves the disadvantages of large size, weight, high cost and high power consumption of current UAV detection equipment

Detection radius 2km, low power consumption, small size, light weight, easy to install.

omnidirectional detection is mainly used for the detection of over-the-horizon UAV, which solves the shortcomings of the current UAV detection equipment such as large volume, large weight, high cost and large power consumption. The equipment has the advantages of high cost performance, long-term stability and reliability, no electric radiation, low power consumption, small size, light weight, easy installation and high cost performance.

$13880
Accurately transmit the azimuth angle and field of view angle of the target to achieve accurate positioning of moving targets such as drones, vehicles, and ships.

Integrated intelligent detection, tracking, early warning and alarm functions laser fill light intelligent identification of optoelectronics

Laser light intelligent identification photoelectric has 7*24h monitoring capabilities, which can carry out fully automatic zooming, focusing and optical fog transmission in any weather conditions. It can recognize more than 80 types of targets, such as people, vehicles, ships, etc., and provide accurate target detection and recognition. It integrates intelligent detection, tracking, alerting, and alarming for zoom close-ups and captures of visible light images. Its design supports a wide range of monitoring from 0-360° horizontally and ±90° vertically, making it suitable for close-range target detection and tracking. The system can accurately transmit the azimuth angle and field of view angle of the target, and realize the accurate positioning of moving targets such as drones, vehicles, and ships.

Inquiry
Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design

The interference frequency and interference bandwidth can be customized according to the mainstream UAV frequency band, and multiple interference channels can be output independently or combined

The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.

$3840
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors and remote detonation of explosives, etc. It is widely used in the military, armed police, public security and other bomb disposal needs.

$78000
Easy to Install Green Safety Partition Control Integrated Design

The detection unit of the decoy active defense system detects and identifies the upper and lower remote control signals and data image transmission signals of the UAV to realize the intrusion warning of the UAV

The active defense system integrates the functions of radio detection and decoy interference, and a single system has both detection and decoy countermeasures. The detection unit of the decoy active defense system detects and recognizes the up and down remote control signals and data image transmission signals of the drone, and realizes the intrusion warning of the drone. At the same time, the system cooperates with the deception and jamming unit to launch simulated satellite navigation signals to deceive the drone in navigation, so that the drone intruding into the defense area is "lost", which makes the drone unable to fly according to the predetermined path, and realizes the no-flying of the drone area control.

Inquiry
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
Multi-device Networking Application Rough Direction Finding Programmable Frequency Band Passive Detection

A portable drone control device is a hand-held integrated detector and jammer. It integrates detection, countermeasures, display and control, and power supply

Portable Drone Control Equipment is a Handheld Integrated Detector & Jammer. It integrates detection, countermeasures, display & control, and power supply all in one. It solved the problem found in the traditional portable jammers which only rely on naked eyes searching for drones with high missing rate. The device is in small size, light weight, and has good mobility, which is suitable for low-altitude protection tasks for important meetings, large events, and daily patrols in fixed places, etc. It can be interconnected with Novasky Anti-drone Defense System command terminal and the integrated command platform through a wireless network at multiple levels and combining with other AUDS equipment, to intelligentlize the information fusion, and unify the platform management. In this case, all resource can be utilized in maximum to construct a new type of supervision network for drones.

$55660
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Shop by Categories